Pneumatický utahovák NORBAR PTM-52-500-B-IC s elektronickým řízením a měřením momentu s vypnutelným interním kontrolním systémem je navržen tak, aby byl jedním z nejlehčích a nejrychlejších nástrojů tohoto typu na trhu. Mimořádně kompaktní průměr převodovky (52 mm) zaručuje, že nástroj je dobře vyvážený, lehký a poskytuje vynikající přístup ke šroubům. Utahovák je velmi tichý, při zatížení vykazuje méně než 85 dB. Navíc se vyznačuje nízkou hladinou vibrací pro pohodlné a bezpečné použití. Integrace elektronického měření a řízení momentu do série PTM-52, je dosaženo s minimálním dopadem na celkovou velikost a hmotnost nástroje. K snadné manipulaci a kontrole napomáhá snímač kroutícího momentu, snadno čitelný LED displej, ovládací panel a elektromagnetický ventil pro vypnutí přívodu vzduchu, jakmile je dosaženo požadovaného momentu. TECHNICKÁ SPECIFIKACE: Velikost čtyřhranu: 3/4 " Tlak vzduchu max: 6,3 bar Spotřeba vzduchu: 19 l / sec Hmotnost: 4,9 kg Hmotnost páky: 0,85 kg volnoběžné otáčky: 224 rpm Rozsah kroutícího momentu: 100 - 500 Nm Přesnost: +/- 2%

Pneumatic Multiplier, 500 N·m, Bi-Directional, Stall, 3/4" square drive; PneuTorque, PTM-52-500-BThe PTM-52 is engineered to be one of the lightest and fastest tools of its type on the market. The exceptionally compact 52mm diameter gearbox means that the tool is well balanced, light weight and provides excellent access to bolts.

Pneumatic Multiplier, 500 N·m, Bi-Directional, Shut-Off External Control, 3/4" square drive; PneuTorque PTM-52-500-B-ECThe PTM-52 is engineered to be one of the lightest and fastest tools of its type on the market. The exceptionally compact 52mm diameter gearbox means that the tool is well balanced, light weight and provides excellent access to bolts. The integration of electronic torque measurement and control into the PTM-52 Series is achieved with the minimum impact on overall tool size and weight. Shut-Off, External Control incorporates a transducer, solenoid valve and three coloured LEDs for the indication of low, within tolerance and high results. All control functions and torque display are housed in an external controller unit (purchased separately).

Pneumatic Multiplier, 1350 N·m, Bi-Directional, Shut-Off Internal Control, 1" square drive; PneuTorque PTM-72-1350-B-ICPTM-72 tools use the same 'twin motor' handle as the PTM-52 but fitted with a durable 72mm gearbox to allow higher torque outputs. The 'twin motor' concept gives the benefit of high run-down speeds while adding very little to the size and weight of the tool. The integration of electronic torque measurement and control into the PTM-72 Series is achieved with the minimum impact of overall size and weight. The actual applied torque is accurately measured at the output of the tool meaning that a repeatability of ±2% can be guaranteed. Shut-Off, Internal Control tools include a torque transducer, easy to read LED display, control panel and a solenoid valve to shut off the air supply once the desired torque has been reached.

Pneumatic Multiplier, 2000 N·m, Bi-Directional, Shut-Off Internal Control, 1" square drive; PneuTorque PTME-72-2000-B-ICThe PTME-72 series of tools was designed to meet the needs of the commercial vehicle wheel market. The integrated reaction foot is designed specifically to reach recessed wheel bolts and the 72mm diameter gearbox is selected to cope with the high frequency of use demanded by busy tyre shops. The integration of electronic torque measurement and control into the PTME-72 series is achieved with the minimum impact on overall tool size and weight. The actual applied torque is accurately measured at the output of the tool meaning that a repeatability of ±2% can be guaranteed. Shut-Off, Internal Control tools include a torque transducer, easy to read LED display, control panel and a solenoid valve to shut off the air supply once the desired torque has been reached.

Pneumatic Multiplier, 2000 N·m, Bi-Directional External Control, 1" square drive; PneuTorque PTME-72-2000-B-ECThe PTME-72 series of tools was designed to meet the needs of the commercial vehicle wheel market. The integrated reaction foot is designed specifically to reach recessed wheel bolts and the 72mm diameter gearbox is selected to cope with the high frequency of use demanded by busy tyre shops. The integration of electronic torque measurement and control into the PTME-72 series is achieved with minimum impact on overall tool size and weight. The actual applied torque is accurately measured at the output of the tool meaning that a repeatability of ±2% can be guaranteed. Shut-Off, External Control tools incorporate a transducer, solenoid valve and three coloured LEDs for the indication of low, within tolerance or high results. However, all control functions and torque display are housed in an external controller unit (purchased separately).

PTS-52 Series, 500 N·mThe PTS is the result of an extensive design project to produce an efficient air motor, purpose built for this application in an accurate torque tool. The new air motor is then married to Norbar's respected gearbox range, sharing common torque reaction accessories with PTM and EvoTorque® tools.

PTS-52 Series, 800 N·mThe PTS is the result of an extensive design project to produce an efficient air motor, purpose built for this application in an accurate torque tool. The new air motor is then married to Norbar's respected gearbox range, sharing common torque reaction accessories with PTM and EvoTorque® tools.

PTS-72 Series, 1000 N­·mThe PTS is the result of an extensive design project to produce an efficient air motor, purpose built for this application in an accurate torque tool. The new air motor is then married to Norbar's respected gearbox range, sharing common torque reaction accessories with PTM and EvoTorque® tools.

PTS-72 Series, 1350 N­·mThe PTS is the result of an extensive design project to produce an efficient air motor, purpose built for this application in an accurate torque tool. The new air motor is then married to Norbar's respected gearbox range, sharing common torque reaction accessories with PTM and EvoTorque® tools.

PTS-80 Series, 2700 N·mThe PTS is the result of an extensive design project to produce an efficient air motor, purpose built for this application in an accurate torque tool. The new air motor is then married to Norbar's respected gearbox range, sharing common torque reaction accessories with PTM and EvoTorque® tools.

PTS-119 Series, 6000 N·mThe PTS is the result of an extensive design project to produce an efficient air motor, purpose built for this application in an accurate torque tool. The new air motor is then married to Norbar's respected gearbox range, sharing common torque reaction accessories with PTM and EvoTorque® tools.

PTS-52 Series with Dual Trigger, 500 N·mThe PTS is the result of an extensive design project to produce an efficient air motor, purpose built for this application in an accurate torque tool. The new air motor is then married to Norbar's respected gearbox range, sharing common torque reaction accessories with PTM and EvoTorque® tools.

PTS-52 Series with Dual Trigger, 800 N·mThe PTS is the result of an extensive design project to produce an efficient air motor, purpose built for this application in an accurate torque tool. The new air motor is then married to Norbar's respected gearbox range, sharing common torque reaction accessories with PTM and EvoTorque® tools.

PTS-72 Series with Dual Trigger, 1000 N­·mThe PTS is the result of an extensive design project to produce an efficient air motor, purpose built for this application in an accurate torque tool. The new air motor is then married to Norbar's respected gearbox range, sharing common torque reaction accessories with PTM and EvoTorque® tools.

PTS-72 Series with Dual Trigger, 1350 N­·mThe PTS is the result of an extensive design project to produce an efficient air motor, purpose built for this application in an accurate torque tool. The new air motor is then married to Norbar's respected gearbox range, sharing common torque reaction accessories with PTM and EvoTorque® tools.

PTS-80 Series with Dual Trigger, 2700 N·mThe PTS is the result of an extensive design project to produce an efficient air motor, purpose built for this application in an accurate torque tool. The new air motor is then married to Norbar's respected gearbox range, sharing common torque reaction accessories with PTM and EvoTorque® tools.

PTS-119 Series with Dual Trigger, 6000 N·mThe PTS is the result of an extensive design project to produce an efficient air motor, purpose built for this application in an accurate torque tool. The new air motor is then married to Norbar's respected gearbox range, sharing common torque reaction accessories with PTM and EvoTorque® tools.